The ZL-B series plastic flakes agglomerator (Densifier) is used to granulate the thermal plasticity films or profiles which thickness is less than 2 mminto particles directly. The soft PVC, LDPE, HDPE, PS, PP, foam PS and other thermoplastics are suitable for it.
When the waste plastic is put into the container of the agglomerator, it will be cut into smaller chips due to the crushing function of the rotating knife and fixed knife. During the crushing processing, the material that soaked up lots heat from the frictional movement and the wall of container will become semi-plasticizing state. The particles will stick with each other due to the function of plasticization. Before it sticks each other completely, the cold water pre-prepared is sprayed into the material. The water will be evaporated off quickly and the surface temperature of material will drop down quickly also. The crushed material will become particles. the particles can be colored by using of color agent being put into the container during the crushing process.
The particles can be used for extruder or injection mould machine. It is possible that the particles can be pelletized again by extruding pelletizing line for some advanced requirements.